Voltas Inverter AC E1 Error Code: Troubleshooting Guide


The E1 error code might be quite annoying if you have a Voltas Inverter AC. A communication issue exists between the air conditioner’s interior and outside units, as indicated by the E1 error number. You can solve the problem and have your Voltas Inverter AC operating at its best again by figuring out what caused this mistake and learning how to fix it. The E1 error code may have several causes, which we will examine in detail in this detailed tutorial, along with step-by-step instructions for troubleshooting and fixing it. In order to have your air conditioner operating effectively once again, let’s get started.

Voltas Inverter AC E1 Error Code: Overview

A Voltas Inverter AC’s E1 error code denotes a problem with communication between the interior and outdoor units. When this issue happens, it interferes with the AC system’s regular operation and causes either insufficient cooling or a total shutdown. The E1 error code can be caused by a number of things, from straightforward errors to more intricate technological concerns. You may identify the problem and fix it by using the troubleshooting techniques shown below, which will also ensure that your Voltas Inverter AC operates at peak efficiency.

Possible Causes of Voltas Inverter AC E1 Error Code

  1. Faulty Wiring Connections: Improper or loose wiring connections between the indoor and outdoor units can trigger the E1 error code. Over time, vibrations or external factors may cause the wires to become loose or damaged, disrupting the communication between the units.
  2. Interference from Electronic Devices: Other electronic devices or appliances located near the AC units can interfere with the communication signal, leading to the E1 error code. Devices such as televisions, radios, or even wireless routers operating on the same frequency can cause disruptions.
  3. Power Supply Issues: Inadequate power supply or voltage fluctuations can affect the communication between the indoor and outdoor units, resulting in the E1 error. Voltage spikes or drops can disrupt the system’s operation and trigger error codes.
  4. Faulty Control Board: A malfunctioning control board in either the indoor or outdoor unit can cause the E1 error code. The control board is responsible for transmitting signals and maintaining communication between the units. If it fails to function correctly, the error code may appear.
  5. Software or Firmware Glitches: Like any electronic device, the Voltas Inverter AC relies on software and firmware to function properly. Glitches or errors in the programming can lead to communication failures and the E1 error code.
  6. Defective Sensors: The AC system relies on various sensors to monitor temperature, humidity, and other parameters. If any of these sensors are defective or malfunctioning, they may send incorrect signals or fail to transmit data, leading to the E1 error code.

Troubleshooting Voltas Inverter AC E1 Error Code

To resolve the E1 error code on your Voltas Inverter AC, follow these step-by-step troubleshooting methods:

1. Check Wiring Connections

Start by inspecting the wiring connections between the indoor and outdoor units. Ensure all connections are secure and properly seated. Look for any signs of loose or damaged wires and address them accordingly. Tighten any loose connections and replace any damaged wires or connectors.

2. Remove Interference Sources

Identify any electronic devices or appliances near the AC units that may be causing interference. Temporarily turn off or move these devices away from the AC system. Check if the E1 error code persists after removing the potential sources of interference.

3. Monitor Power Supply

Ensure your Voltas Inverter AC is receiving a stable power supply. Use a voltage stabilizer if necessary to mitigate voltage fluctuations. Unstable power supply can lead to communication errors, including the E1 error code.

4. Reset the AC Unit

Turn off the power supply to both the indoor and outdoor units of your Voltas Inverter AC. Wait for a few minutes before turning them back on. Resetting the units can sometimes clear minor communication issues and resolve the E1 error code.

5. Update Software/Firmware

Check if there are any available software or firmware updates for your Voltas Inverter AC model. Visit the official Voltas website or contact their customer support for the latest updates. Updating the software or firmware can fix any glitches or bugs that may be causing the E1 error.

6. Check and Replace Faulty Sensors

Inspect the sensors in your Voltas Inverter AC system. Look for any signs of physical damage or malfunction. If a sensor appears faulty, consult the user manual or contact a professional technician to replace it. Ensure the replacement sensor is compatible with your AC model.

FAQs about Voltas Inverter AC E1 Error Code

Q: Can I fix the E1 error code on my Voltas Inverter AC by myself?

A: While some troubleshooting steps can be performed by homeowners, it is recommended to seek professional assistance for complex issues or if you are unsure about the steps involved. Hiring a qualified technician ensures proper diagnosis and minimizes the risk of further damage.

Q: How long does it take to fix the E1 error code?

A: The time required to fix the E1 error code varies depending on the underlying cause. Simple issues like loose wiring connections can be resolved quickly, while more complex problems may require more time. It is best to consult a professional technician who can assess the situation and provide an estimated timeline.

Q: Can the E1 error code be prevented?

A: While some causes of the E1 error code may be beyond your control, regular maintenance and inspections can help prevent issues. Ensuring proper wiring connections, keeping the AC unit free from dust and debris, and scheduling annual maintenance checks can minimize the chances of encountering the E1 error.

Q: Will resetting the AC fix the E1 error code?

A: Resetting the AC unit by turning off the power supply can sometimes clear minor communication issues and temporarily resolve the E1 error code. However, if the error persists, it is recommended to follow the troubleshooting steps outlined above or consult a professional technician.

Q: Are there any risks in attempting to fix the E1 error code without professional help?

A: Attempting to fix the E1 error code without proper knowledge and expertise can potentially lead to further damage or voiding the warranty. To ensure a safe and accurate resolution, it is advisable to seek assistance from a qualified technician.

Q: Can the E1 error code recur after it has been fixed?

A: In some cases, the E1 error code may reoccur if the underlying cause is not completely resolved. It is important to address all potential causes and follow the recommended troubleshooting steps. Regular maintenance and inspections can help prevent the error from recurring.


Encountering the E1 error code on your Voltas Inverter AC can be frustrating, but by following the troubleshooting methods outlined in this guide, you can diagnose and resolve the issue. Remember to check wiring connections, remove interference sources, monitor power supply, reset the AC unit, update software/firmware, and inspect sensors. If you are unsure or uncomfortable performing any of these steps, it is always recommended to seek professional assistance. A qualified technician can provide expert diagnosis and ensure the proper resolution of the error.

Leave a Comment