If your air conditioner displays E1 in the display panel and won’t turn on, it means that the Room Thermistor (a device connected to the thermostat that detects room temperature) is shorted or defective, and you need to have your air conditioner serviced.
Just clean air filter and remove dirt..The most common reason for an E2 error is a dirty air filter.
The E1 error code on a Voltas AC indicates a problem with the indoor fan. This could be due to a number of factors, including:
- A dirty or clogged air filter
- A faulty indoor fan motor
- A problem with the control board
- A loose or damaged wiring connection
If you see the E1 error code on your Voltas AC, the first thing you should do is check the air filter. If it’s dirty or clogged, clean it or replace it. If the air filter is clean, you may need to call a qualified technician to diagnose and repair the problem.
Here are some troubleshooting steps you can try to fix the E1 error code on your Voltas AC:
- Check the air filter and make sure it’s clean.
- Unplug the AC for 30 seconds and then plug it back in.
- Reset the AC by pressing the power button for 10 seconds.
- Check the wiring connections to make sure they’re tight and secure.
- If you’re still having problems, call a qualified technician.
Here are some tips to prevent the E1 error code from happening in the future:
- Clean the air filter regularly.
- Have the AC serviced annually by a qualified technician.
- Avoid running the AC in extreme temperatures.
- If the AC is not used for an extended period of time, unplug it.
I hope this helps!