The Taurus Prepaid Electricity Meter is a single-phase meter that uses a prepaid system to distribute electricity. This means that the user must purchase tokens in order to use electricity, and the meter will only supply electricity until the tokens are depleted.
The Taurus Prepaid Electricity Meter displays error codes to indicate faults or problems with the meter. Here are some of the error codes that may be displayed on the Taurus Prepaid Electricity Meter:
Taurus Prepaid Electricity Meter Error Code
Error Code 1: Credit
Error Code 2: Overpower
Error Code 3: Earth
Error Code 4: Test all
Error Code 5: Trip test
Error Code 6: External disconnect
Error Code 7: Lockout
Error Code 8: Voltage fail
Error Code 9: Tamper
Error Code 10: Novram
Error Code 11: Phase error
- Error 1: Credit Error. This means that there is not enough credit on the meter to supply electricity.
- Error 2: Over power Error. This means that the meter has detected an overload condition.
- Error 3: Earth Error. This means that the meter has detected a ground fault condition.
- Error 4: Test all Error. This means that the meter is in test mode.
- Error 5: Trip test Error. This means that the meter has tripped due to a fault.
- Error 6: External disconnect Error. This means that the meter has been disconnected by an external device.
- Error 7: Lockout Error. This means that the meter has been locked out due to a fault.
- Error 8: Voltage fail Error. This means that the meter has detected a low voltage condition.
- Error 9: Tamper Error. This means that the meter has been tampered with.
- Error 10: Novram Error. This means that the meter’s non-volatile memory has failed.
- Error 11: Phase error. This means that the meter has lost power from one of the three phases.
If you see any of these error codes on your Taurus Prepaid Electricity Meter, you should contact your power utility company immediately. They will be able to send a technician to investigate the problem and repair the meter if necessary.
Here are some additional tips for troubleshooting Taurus Prepaid Electricity Meter error codes:
- Make sure that your appliances are turned off and that there are no loose connections in the electrical wiring.
- If you have recently installed a new appliance, check the appliance’s power rating to make sure that it is not overloading the circuit.
- If you have recently experienced a power outage, check the meter to make sure that it is not damaged.
If you have checked all of the above and the error code is still displayed, you should contact your power utility company for assistance.