The SC error code on a Samsung washer means that the washer is not draining properly. This can be caused by a number of things, including a blocked drain hose, a clogged drain pump filter, or a faulty drain pump.
SC Error Code Samsung washer
why get this Error: Samsung washer SC error code indicates that the drain cycle is taking a long time which could mean that certain components are clogged with lint, dirt, and debris.
Here are some simple steps you can follow to fix the SC error code on your Samsung washer:
- Check the drain hose for any blockages. You can do this by disconnecting the hose from the washer and running water through it to see if it flows freely.
- Clean the drain pump filter. The drain pump filter is located at the bottom of the washer, underneath the detergent dispenser. To clean it, you will need to remove the filter and then rinse it under running water.
- Test the drain pump. You can test the drain pump by running the washer on a “Spin Only” cycle. If the pump is working properly, you should hear it running during the cycle.
- If you have tried all of these steps and the SC error code is still appearing, you may need to call a qualified technician for further assistance.
Here are some additional tips to help prevent the SC error code from occurring in the future:
- Use the correct amount of detergent. Using too much detergent can cause suds to build up, which can block the drain hose or pump.
- Clean the lint trap after every load. The lint trap can trap small objects, such as coins or buttons, which can also block the drain hose or pump.
- Inspect the drain hose for any kinks or bends. A kinked or bent drain hose can restrict the flow of water, which can lead to the SC error code.