If your Samsung dishwasher gives you a warning with Error Code, there is a problem. Here is a list of references that will help you figure out what the problem is and what steps need to be taken.
List of Samsung dishwasher error codes:
- ED: Error detected. This is a general error code that can indicate a number of problems, including a faulty control board, a problem with the water inlet valve, or a problem with the drain pump.
- IE: Inlet error. This means that the dishwasher is not getting enough water. This could be caused by a number of things, including a faulty water inlet valve, a kinked water inlet hose, or a low water pressure.
- OE: Overheat error. This means that the dishwasher has exceeded its maximum operating temperature. This could be caused by a number of things, including a faulty heating element, a blocked drain, or a build-up of food particles.
- LE: Leak error. This means that the dishwasher has detected a leak. This could be caused by a number of things, including a faulty float switch, a leak in the drain hose, or a leak in the water inlet hose.
- UE: Unbalanced load error. This means that the dishes in the dishwasher are not evenly distributed. This could cause the dishwasher to not clean properly.
- FE: Filter error. This means that the filter in the dishwasher is clogged. This can prevent the dishwasher from draining properly.
- PF: Power failure error. This means that the dishwasher has lost power. This could be caused by a power outage or a problem with the dishwasher’s power supply.
- CE: Communication error. This means that the dishwasher is not communicating with its control board. This could be caused by a faulty control board, a loose connection, or a problem with the communication cable.
- SE: Sensor error. This means that one of the sensors in the dishwasher is not working properly. This could cause the dishwasher to not operate properly.
- AE: Door error. This means that the dishwasher door is not closed properly. This could prevent the dishwasher from starting or operating properly.
If you see an error code on your Samsung dishwasher, you should consult the dishwasher’s manual to determine the specific cause of the error. In some cases, you may be able to fix the problem yourself. However, if you are not comfortable troubleshooting dishwashers, you should contact a qualified technician for assistance.
Here are some additional tips for troubleshooting Samsung dishwasher error codes:
- Check the water supply. Make sure that the dishwasher is receiving the correct voltage and current.
- Check the communication cables. Make sure that the communication cables are properly connected and that there are no breaks in the cables.
- Reset the dishwasher. This may clear the error code and allow the dishwasher to operate normally.
- Update the dishwasher firmware. If the dishwasher firmware is outdated, it may be causing the error code.
- Contact the dishwasher manufacturer. If you are unable to troubleshoot the error code, you should contact the dishwasher manufacturer for assistance.