LG Inverter AC CH 10 Error Code: Troubleshooting Guide


The CH 10 error number is common, so you’re not the only owner of an LG inverter air conditioner. It can be very aggravating to receive this error number, which is a typical problem for LG AC customers. The issue may be easily solved, though, if you comprehend the root reason and know how to address it. The LG Inverter AC CH 10 error code, its causes, and step-by-step fixes will all be covered in detail in this extensive manual. To reclaim the cool comfort in your house, let’s get started now.

LG Inverter AC CH 10 Error Code: Overview

The LG Inverter AC CH 10 error number indicates a communication issue between your air conditioner’s internal and exterior units. When this issue happens, it interferes with the AC system’s normal operation and causes either insufficient cooling or a total shutdown. The CH 10 mistake can be caused by a number of things, from straightforward faults to more intricate technological concerns. You may identify and fix the problem by using the troubleshooting procedures shown below, ensuring that your LG Inverter AC operates at peak efficiency.

Possible Causes of LG Inverter AC CH 10 Error Code

  1. Faulty Wiring Connections: Improper or loose wiring connections between the indoor and outdoor units can trigger the CH 10 error code. Over time, vibrations or external factors may cause the wires to become loose or damaged, disrupting the communication between the units.
  2. Defective Control Board: A malfunctioning control board in either the indoor or outdoor unit can lead to the CH 10 error. The control board is responsible for transmitting signals and maintaining communication between the units. If it fails to function correctly, the error code may appear.
  3. Interference from External Devices: Electronic devices or appliances located near the AC units can interfere with the communication signal, resulting in the CH 10 error. Devices such as televisions, radios, or even wireless routers can cause disruptions, especially if they are operating on the same frequency.
  4. Faulty Sensors: The AC system relies on various sensors to monitor temperature, pressure, and other parameters. If any of these sensors are defective or malfunctioning, they may send incorrect signals or fail to transmit data, leading to the CH 10 error code.
  5. Power Supply Issues: Inadequate power supply or voltage fluctuations can affect the communication between the units, triggering the CH 10 error. Voltage spikes or drops can disrupt the system’s operation and cause error codes to appear.
  6. Software or Firmware Glitches: Like any electronic device, the LG Inverter AC relies on software and firmware to function correctly. If there are glitches or errors in the programming, it can result in communication failures and the CH 10 error.

Troubleshooting LG Inverter AC CH 10 Error Code

To resolve the CH 10 error code on your LG Inverter AC, follow these step-by-step troubleshooting methods:

1. Check Wiring Connections

Start by inspecting the wiring connections between the indoor and outdoor units. Ensure all connections are secure and properly seated. Look for any signs of loose or damaged wires and address them accordingly. Tighten any loose connections and replace any damaged wires or connectors.

2. Power Cycle the AC Units

Turn off the power supply to both the indoor and outdoor units of your LG Inverter AC. Wait for a few minutes before turning them back on. Power cycling the units can reset the system and resolve minor communication issues.

3. Remove Interference Sources

Identify any electronic devices or appliances near the AC units that may be causing interference. Temporarily turn off or move these devices away from the AC system. Check if the CH 10 error code persists after removing the potential sources of interference.

4. Check and Replace Faulty Sensors

Inspect the sensors in your LG Inverter AC system. Look for any signs of physical damage or malfunction. If a sensor appears faulty, consult the user manual or contact a professional technician to replace it. Ensure the replacement sensor is compatible with your AC model.

5. Monitor Power Supply

Ensure your LG Inverter AC is receiving a stable power supply. Use a voltage stabilizer if necessary to mitigate voltage fluctuations. Unstable power supply can lead to communication errors, including the CH 10 error code.

6. Update Software/Firmware

Check if there are any available software or firmware updates for your LG Inverter AC model. Visit the official LG website or contact their customer support for the latest updates. Updating the software or firmware can fix any glitches or bugs that may be causing the CH 10 error.

FAQs about LG Inverter AC CH 10 Error Code

Q: Can I fix the CH 10 error code on my LG Inverter AC by myself?

A: While some troubleshooting steps can be performed by homeowners, it is recommended to seek professional assistance for complex issues or if you are unsure about the steps involved. Hiring a qualified technician ensures proper diagnosis and minimizes the risk of further damage.

Q: How long does it take to fix the CH 10 error code?

A: The time required to fix the CH 10 error code varies depending on the underlying cause. Simple issues like loose wiring connections can be resolved quickly, while more complex problems may require more time. It is best to consult a professional technician who can assess the situation and provide an estimated timeline.

Q: Can the CH 10 error code be prevented?

A: While some causes of the CH 10 error code may be beyond your control, regular maintenance and inspections can help prevent issues. Ensuring proper wiring connections, keeping the AC unit free from dust and debris, and scheduling annual maintenance checks can minimize the chances of encountering the CH 10 error.

Q: Will resetting the AC fix the CH 10 error code?

A: Power cycling the AC units by turning them off and on can sometimes resolve minor communication issues and temporarily clear the CH 10 error code. However, if the error persists, it is recommended to follow the troubleshooting steps outlined above or consult a professional technician.

Q: Are there any risks in attempting to fix the CH 10 error code without professional help?

A: Attempting to fix the CH 10 error code without proper knowledge and expertise can potentially lead to further damage or voiding the warranty. To ensure a safe and accurate resolution, it is advisable to seek assistance from a qualified technician.

Q: Can the CH 10 error code recur after it has been fixed?

A: In some cases, the CH 10 error code may reoccur if the underlying cause is not completely resolved. It is important to address all potential causes and follow the recommended troubleshooting steps. Regular maintenance and inspections can help prevent the error from recurring.




Encountering the LG Inverter AC CH 10 error code can be frustrating, but with the proper troubleshooting steps, you can restore the functionality of your air conditioner. By addressing potential causes such as faulty wiring connections, sensor issues, interference sources, and power supply problems, you can resolve the CH 10 error code and enjoy the cooling comfort of your LG Inverter AC once again.

Remember, if you are unsure or uncomfortable performing any of the troubleshooting steps, it is always recommended to seek professional assistance. A qualified technician can provide expert diagnosis and ensure the proper resolution of the error.

Leave a Comment