The LE error code in an LG washer indicates a problem with the motor. It stands for “Locked Motor Error.” When this error occurs, the washer’s motor is unable to function properly, leading to the machine’s inability to perform the wash cycle. To resolve the LE error code, follow these troubleshooting steps:
Troubleshooting LG Washer LE Error Code | Step-by-Step Guide for Fixing the Issue”
1. Stop the Washer
When the LE error code appears, stop the washer immediately to prevent any potential damage to the motor or other components. Turn off the power and unplug the washer from the electrical outlet.
2. Let the Washer Rest
In some cases, the LE error code may be triggered by an overload or imbalance in the drum. Allow the washer to rest for about 30 minutes to cool down and reset any internal sensors.
3. Check for Overloading
Overloading the washer with too many clothes can strain the motor, causing the LE error code. Make sure you are not overloading the washer and that the clothes are evenly distributed in the drum.
4. Verify the Drum Spin Freely
Manually rotate the drum by hand to check if it spins freely. If you encounter any resistance or if the drum seems to be stuck, there may be an obstruction or a mechanical issue that needs attention.
5. Inspect the Motor and Rotor Position Sensor
The LE error code can also be triggered by a problem with the motor or the rotor position sensor. These components are essential for the motor’s operation. Check for any visible signs of damage or loose connections. If you are comfortable doing so, you can also try to clean the connections and reseat the wires.
6. Run a Motor Test
LG washers often have a motor test mode that can help diagnose the issue further. Refer to your washer’s user manual for instructions on how to access and perform the motor test. The test results can provide valuable information for troubleshooting.
7. Contact LG Customer Support
If the LE error code persists despite trying the above steps, it may require professional attention. Contact LG customer support or schedule a service appointment with a certified technician. They can diagnose the problem accurately and perform any necessary repairs or replacements.
8. Preventive Maintenance
To avoid future occurrences of the LE error code, perform regular maintenance on your LG washer. Keep the drum clean, remove lint and debris from the drum and drain filter, and check the motor and rotor position sensor periodically for any signs of wear or damage.
Remember to prioritize safety when troubleshooting or performing any repairs on the washer. Always unplug the washer from the power source before attempting any maintenance tasks.