IFB front load washing machine error code with meaning list


There are different types of error codes that can appear on the display of your IFB front load washing machine. These codes indicate the possible causes and solutions for the problems that your machine is facing. Here are some of the common error codes and their meanings:

  • dLEr: This code means that there is a problem with the door lock. You can try to switch off the machine for 2 minutes and then try opening the door again. Do not force the door open. If the problem persists, you may need to call an IFB service engineer12.
  • tAP: This code means that the machine is not receiving water. You can check if the water tap is turned on, if the water pressure is adequate, if the inlet filter is clean, and if the inlet hose is not bent or kinked3.
  • trC or tACO: This code means that there is a door error. This can happen when clothes get stuck between the drum and the door, preventing it from opening properly. You can try to turn off the machine and restart it after 2 minutes, drain any water in the machine, and remove any clothes that are blocking the door3. If you still cannot open the door, you may need to contact IFB Care for assistance3.
  • dPEr: This code means that there is a drainage error. This can be caused by a clogged drain hose or a blocked filter. You can try to press the Start/Pause button, switch off your machine and clean your filter, and clean your outlet pipe3.
  • HEAt: This code means that the water temperature is higher than 60 degrees Celsius. You can wait for the water to cool down and restart the machine. If the problem continues, you may need to call IFB Care3.
  • OFEr or Pr5: These codes mean that there is an unexplained error or a malfunctioning water pressure sensor. You can try to restart your machine and see if the error goes away. If not, you may need to call IFB Care right away3.

These are some of the common IFB front load washing machine error codes that you may encounter. For more information, you can refer to your user manual or visit these websites4312. I hope this helps you to solve your washing machine problems.

Sure, here is a list of IFB front-load washing machine error codes with solutions:

Error Code Solution
dLEr Switch off the program selector.
dLAY The start mode will be delayed.
tAP Turn on the tap.
tACO / trC Switch off the program selector with a 2-second waiting time.
dPEr Drainage error caused by either a clogged drain hose or a blocked filter.
UnbL Laundry load is small, which can lead to an unbalanced condition.
OFEr or Pr5 Overflow sensor has been activated.
E01 Water level sensor error.
E02 Motor defect.
E03 Water supply error.
E04 Water temperature error.
E05 Heater error.
E06 Door lock error.
L175 Low voltage error.
H260 Door heat error.

Here are some additional troubleshooting tips:

  • If you see any error codes, first check the user manual for your specific washing machine model. The manual may contain additional troubleshooting tips for specific error codes.
  • If you are still having trouble, contact IFB customer service for assistance. They will be able to help you troubleshoot the problem and determine the best course of action.

Leave a Comment