Pellet stove error codes

Here are some common pellet stove error codes:

Error 1: No flame detected. This could be due to a number of factors, including a faulty igniter, a blockage in the auger, or a low pellet level.
Error 2: Failure to light. This could be due to a number of factors, including a faulty igniter, a low pellet level, or a problem with the electrical supply.
Error 3: Timeout error. This means that the stove has not been able to detect a flame after a certain amount of time. This could be due to a number of factors, including a low pellet level, a blockage in the auger, or a problem with the igniter.
Error 4: High limit error. This means that the stove has reached a dangerously high temperature. This could be due to a number of factors, including a blocked intake, a faulty thermostat, or a problem with the auger.
Error 5: Overflow error. This means that the stove has detected too much fuel in the hopper. This could be due to a number of factors, including a faulty auger, a blockage in the hopper, or a problem with the feed rate.

If you see any of these error codes, the first thing you should do is consult your pellet stove’s owner’s manual. This will give you more information about the specific error code and how to troubleshoot it. In some cases, you may be able to fix the problem yourself. However, if you are not comfortable doing so, you should call a qualified technician.

Here are some additional tips for troubleshooting pellet stove error codes:

Check the pellet level. If the pellet level is low, the stove may not be able to detect a flame.
Check the auger. Make sure that the auger is not blocked and that it is moving freely.
Check the igniter. Make sure that the igniter is working properly.
Check the electrical supply. Make sure that the stove is getting power.

If you have checked all of these things and you are still getting an error code, you should call a qualified technician. They will be able to diagnose the problem and fix it for you.