DJI drones use a variety of error codes to indicate problems with the drone or its components. The specific error codes that you may encounter will vary depending on the model of your drone. However, some common DJI error codes include:
DJI error code List
Error Code 10001: Camera malfunction. Repairs required. Contact DJI Support for assistance
– All you can do is restart the drone. If it doesn’t help, replace or repair the Gimbal camera.
Error Code 10016: Camera not calibrated. Image quality can be affected. Contact DJI Support for assistance.
– Calibrate the camera, if the error persists – replace or repair the camera.
Error Code 10022: No SD card. Insert sd card
– Just insert or replace the card.
Error Code 10023: SD card malfunction. Change card
– Try pulling and inserting back. It did not help – change the SD card.
Error Code 30007 & 30008: No GPS signal. Unable to hover. Fly with caution
– Repair or replacement of the gps module is required.
Error Code 30047: Barometer initialization failed. Restart aircraft
– Follow the instructions of the DJI.
Error Code 30049: GPS Module Error. Restart Aircraft
– Restart the mavic mini. If it does not help, repair or replace the gps module.
Error Code 30050: IMU calibration required. Calibrate IMU
– In the settings, find the IMU calibration function and calibrate according to the instructions. If it does not help, repair or replace the gps module.
Error Code 30055: IMU not calibrated. Calibrate IMU
– Repeat the same steps as with the Code 30050 error.
Error Code 30060: Compass error. Ensure there are no metal or magnetic objects near the aircraft and calibrate it before use.
– If there are definitely no metal objects around the Mavic mini and calibration does not help – repair or replace the GPS module.
Error Code 30064: Unable to TakeOff.
– Make sure that nothing prevents the drone from taking off and that you are in the area where flights are allowed. If all conditions are met, but the error remains – restart Mavic mini. Doesn’t help – update the firmware. If again the error – need to repair the Mavic mini ( but here it needs to understand which module is broken, the fastest is the problem in the ESC module).
Error Code 30168: Aircraft power insufficient. Fly with caution.
– The error most often occurs in high winds, but it can be due to a worn battery or a faulty ESC module.
Error Code 30210: Power system hardware. Restart aircraft
– Reboot helps. If not, update the firmware.
Error Code 30226: Start failed. Restart aircraft and DJI Fly App
– Follow the instructions of the DJI.
Error Code 40002: Gimbal stuck. Check whether the gimbal cover is removed and ensure the gimbal can rotate freely
– Be careful. You can burn the suspension motors if you forget to remove the cover.
Error Code 40011: Gimbal calibration error. Restart aircraft.
– Calibrate the gimbal in the settings. If calibration does not work, replace the gimbal.
Error Code 40012: Gimbal unable to connect. Repairs required. Contact DJI Support for assistance.
– Need to replace the gimbal. Watch the video on how to do it.
Error Code 40021: Gimbal IMU data error. Contact DJI Support for assistance
– Repair or replace the GPS module. Watch the video on how to do it.
Error Code 180016, 180031, 180030: sensor error. Contact DJI Support for assistance.
– Try restarting the drone. If it does not help, the sensors are broken and must be replaced.